Fameplast
Moldable explosive mass made from a water-in-oil emulsion, with energizing components and sensitizing agents that allow it to obtain a high velocity and detonation pressure, generating a good quality of blasting gases.
Primer
FAMESA EXPLOSIVOS S.A.C. manufactures seismic charges of high explosive power packed in plastic containers, successfully used in the national and international field of seismic prospecting.To satisfy the requirements of seismic prospecting work, FAMESA EXPLOSIVOS S.A.C. has the following types:• MINI PRIMER® 150• MINI PRIMER® 200• PRIMER® 300• MAXI PRIMER® 500• MAXI PRIMER® 1000• MAXI PRIMER® […]
Pentacord
It is a high detonation velocity blasting accessory, easy to handle and safe. It has different presentations of low and high grammage, special for different uses.
Solution N30
It is a salt-based solution that sensitizes the Matrix Emulsion in less time, reaching the desired operating density.
Heavy Anfo
It is a high energy blasting agent with sensitizing components that allow it to obtain a high detonation velocity and detonation pressure, it is safe, water resistant and provides a good quality of blasting gases that ensures as an effect an improvement in advances and rupture volumes.
Superfam L
It has in its composition elements that decrease its density and increase its sensitivity, allowing a low load concentration per drill hole length, optimizing the distribution of energy and allowing less damage to the rock mass.
Superfam DOS® AE
SUPERFAM® DOS AE is characterized because it contains an antistatic additive that allows pneumatic loading, eliminating the static charges generated during the operation.
Superfam DOS®
It is a granular explosive agent composed of ANFO grade prilled ammonium nitrate, a liquid fuel and a colorant. The mixing is carried out on modern, high-precision equipment which, together with the high quality of the components, allows us to produce a blasting agent of optimum quality.
SAN G Wall
SAN-G WALL is a low variable density blasting agent produced by mixing SAN-G APU matrix emulsion produced with a special oil and expanded polystyrene beads in the truck manufacture on site prior to loading into the drill holes.
Pyro SanG
It is used in open-pit mining and is mixed in situ with a gasifying solution that sensitizes it prior to loading into the drill holes with the help of a factory truck that has been specially designed with a PLC system, which allows for adequate sensitization of the matrix.
SAN G Energy
It is a gaseous emulsion formed by a microscopic oxidizing solution dispersed in a continuous combustible phase and stabilized by an emulsifier. Due to its chemical composition, it offers a high energy and detonation velocity that allows us to obtain a high breaking power (brisance), its oxygen balance reduces the emission of nitrous gases after […]
SAN G Aurum Up+
The SAN-G AURUM UP+ is a product developed specifically for use in up-hole drill holes in underground mining.
SAN G Aurum
SAN-G AURUM is used in underground mining, civil works and tunneling works in areas with temperatures ranging from -5°C to 40°C and where water is present.
SAN G Apu
The SAN-G APU has been specially designed for use in surface mining in rock masses where the temperature is between 0°C and 40°C.
Fametronic SSS
The FAMETRONIC® SSS provides a seismic load initiation time with a high degree of precision and accuracy; it is used in conjunction with the Firing Unit, which sends a safety code to the product and in turn transmits the necessary energy to ensure an initiation time of less than one millisecond.
Fametronic XPRO
FAMETRONIC® is an electronic delay detonator used in electronic initiation systems for blasting applications in surface and underground mining, quarries and civil works, offering the benefits of high safety against electric currents, improved fragmentation, reduced vibration and bi-directional programming of the required delay times with high accuracy.
Instant Fulmelec (AN)
The INSTANT FULMELEC® is designed to detonate immediately after applying sufficient current, taking into account the capacity of the explosive device. It is used for blasting initiation in surface mining, underground mining and civil construction works.
Fulmelec SSS (HR – e)
The FULMELEC® SSS (HR – e) is a seismographic electric detonator with high electrical resistance, developed as an accessory for seismic prospecting. It is characterized by a greater insensitivity to electric current, due to an electronic circuit it carries internally. For this reason, the initiation is performed by overcoming a voltage threshold.
Seismographic Fulmelec
“FAMESA EXPLOSIVOS S.A.C. manufactures seismographic electric detonators of different lengths according to the customer’s needs, used successfully and safely in the national and international field.These detonators are used in seismic prospecting, where they act as a powerful initiator of explosive charges at depth, and for this purpose they are provided with a high resistance to […]
Minibooster
The MINI BOOSTER features a design that allows you to insert a Fanel for your Anfo column priming operation up to 3 inches in diameter. Due to its high detonation velocity, it is one of the best initiators of Anfo blasting agents.
Fulmelec Delay (AN – ASA)
“The FULMELEC® DELAY is used for the initiation of explosive charges in mesh designs and has the following advantages:
Booster HDP
“The BOOSTER HDP Series is a powerful explosive of high density, velocity and detonation pressure, so the explosive column that will be activated with it, will maximize its energy development, which will favorably impact the result of the blasting.The BOOSTER HDP was designed to be used for several complementary purposes, thus providing it with great […]
Fanel Delay MS Connector
The Fanel Delay (MS connector) is bidirectional, provides the appropriate delay time in milliseconds and can be used in shots with delayed holes individually or in a row of holes. Designed to be tied at both ends of the detonating cord at the point where detonation delay is desired.
Famecorte E-20
It is an explosive emulsion of low breaking power, specially designed for controlled blasting works, contour, tunnels, quarry slopes, roads, etc. where it is necessary to obtain stable rock profiles without over-excavation.
Famecorte S
Specially designed for the control of final slopes of open pits and smooth walls in quarry and road slopes.
Fanel Polar
FANEL® POLAR is an effective initiation system for use in underground mining, surface mining and civil works, offering the benefits of risk-free synchronization, eliminating any possibility of misconnections in ambient conditions down to -40 °C.
Emulfan
It is an explosive agent, designed to work in drill holes of intermediate diameters, either as a bottom load or column load with abundant water that cannot be evacuated.
Fanel UV
FANEL® UV is an effective initiation system for use in underground mining, surface mining and civil works, offering the benefits of risk-free synchronization, eliminating any possibility of misconnections. It is specially manufactured to work under strong ultraviolet radiation exposure.
Emulgran
Designed to work in drill holes with diameters greater than 3 inches as a column load flooded or with abundant water that cannot be evacuated or where mechanized loading is not possible.
Fanel LSEF
It is used to safely and silently initiate primary and secondary shots from a distance previously set by the blast leader.
Gelatin Dynamite
DINAMITA FAMESA GELATINA® is generally used for blasting in intermediate to very hard rocks, in underground and surface mining, as well as in civil construction works. It is recommended for use as an explosive charge in bottom holes with the presence of water, in stopes, in high hardness ground fronts and/or as a primer cartridge […]
Fanel Dual IV
FANEL® DUAL IV is a non-electric blasting initiation system, which was developed to be used in different blasting applications, mainly in underground mining.The advantages of its use include the following:• Substantial improvement in fragmentation and safety.• Noise reduction by not requiring the use of detonating cord.• Reduction of stocks of various delay times.• Versatility that […]
Semi-Gelatine Dynamite
“DINAMITA FAMESA SEMIGELATINA® (semi-gelatine dynamite) is a Nitroglycerin based explosive, it is sensitive to plain detonator N° 6 which has a high shattering power and good water resistance.This dynamite is used in all types of work in surface and underground mining, as well as civil works, being successfully used in rocks of intermediate to hard […]
Fanel Dual
It is a non-electric initiation system used in surface mining. It is characterized by eliminating the need to maintain and store several delay times, which allows the user to reduce costs. It can be easily and quickly attached to the detonation mesh. It also has a low noise level during detonation.
Powder Dynamite
This dynamite is used in all types of blasting works in surface and underground mining, as well as in civil works, being successfully used in soft to intermediate rocks, where due to its low detonation speed and good sympathy, it is possible to use it in controlled or cushioned blasting using spacers to reduce the […]
Fanel CTD
The Fanel CTD delay system serves to connect downlines and trunk lines, providing the required delay time on firing. Up to 6 Fanel shock tubes can be accommodated.
Emulnor
It is a cartridge explosive emulsion that provides greater safety, power, water resistance and good quality of blasting gases. Its use is oriented to any type of work, with an application method similar to that of conventional dynamites.
Fanel
It is a blasting accessory with improved traction and abrasion characteristics of the Fanel shock tube, making it suitable for all applications in surface mining, underground mining and civil works, achieving high efficiency, safety and increased productivity.
Quick Fuse Connector
It is a complement to the Quick Fuse of the initiation systems category. This aluminum capsule contains in its interior a pyrotechnic charge, with a groove parallel to its base, which is red to differentiate it from the plain detonator.
Quick Fuse
It produces an incandescent flame during its combustion with sufficient temperature to activate the pyrotechnic mass of the quick fuse connector, which ensures efficient ignition of the safety fuse.
CARMEX – Assembled Fuse
It is used to start drill holes in traditional mining or to start blasting safely and efficiently. It is assembled by specialized personnel, through the use of pneumatic clamping machines, thus guaranteeing the tightness of the Detonator – Safety Fuse – Connector.
Plain Detonator
It is a blasting accessory consisting of a cylindrical aluminum capsule closed at one end, inside which there is a primary explosive very sensitive to the spark of the safety fuse and a secondary explosive of high explosive power.
Safety Fuse
It is a blasting accessory and a component of the traditional initiation system. It is characterized by being flexible and has a central core of powder, which transmits the fire to the detonator at a uniform velocity.